Why is it so hot, it’s April!
The next day after the Acuity team had gone, It was time to get to work. We had proven we could do the Job. All the production and assembly issues had been worked out. We had one sphere nearly completed and now it was all about organization, logistics and hard work. I had calculated about 12,000 pieces of glass and 85,000 welds and pieces of metal to be cut for all of the seven sisters. and if there wasn’t enough on our plates, we had a film crew due to arrive from PBS, MPTV (Milwaukee public television). It was the 20th of April and it was getting hot, like mid to high 80’s and by the end of the week it was going to be in the 90’s. the weather never stopped us from working, but when the temp got up into the 90’s the hot shop typically would go to around 100-125. and it would get pretty unbearable. the key was to drink lots of water. and I would use a trick I learned from my days as a golfer. If you keep a towel in a cooler full of ice, about every 30 minutes or so you could take the towel and wring it out, put it over your head for about 30 seconds and breathe in that cold air. when done just put the towel back in the cooler and you were good to go for another 30 minutes. It worked unbelievably well. So we put ourselves on a schedule. I simply figured the number of work days between the installation date and our start date and we had our work schedule pretty much mapped out If we made 100 pieces a day we would have enough glass for our August Installation. Luckily the 3 larger spheres were due in late August. The 4 smaller ones were due in September, which gave us a break and a chance to clear out our shop before beginning the second phase. Even with a 5,000 sq. ft. building it wasn’t enough space to handle all seven spheres.
The day the film crew arrived it was 95 degrees. and I was in no mood to be slowed down by anyone. when it’s that hot out the only thing you think about in the morning is when can I stop. so even before we began they arrived. We had a short meeting about how things would go and then we started. The only problem was I had never been filmed professionally before and was quite nervous about the process and so I asked Lois our producer if she had any pointers for budding film stars and she said “just act naturally” and you’ll be great. and so I did just that and before long it was like they weren’t even there. by day three we had all gone out to dinner a couple of times and we’re having a blast. It wasn’t until a few months later when I saw some edited clips on a high def. monitor that I realized why so much work, effort and resources goes into producing even a 1/2 hour film. Seeing myself on that screen was really cool.
Our arrival in Sheboygan
The plan was to load the 60 Foot air ride FedEx tractor trailer. with the first three metal spheres our tools welder, misc. equipment and the 6000 pieces of red, yellow and orange glass. get on a plane the next morning and the truck would be waiting for us when we got there. So far so good we arrived 15 minutes before the trucks arrival. the only problem was It had also been there a few hours earlier and we were missing a crate. This was a problem because everything we shipped we needed to do the installation. With a lot of fussing and me nearly in panic mode we figured out that the missing crate was all our tools and the welding machine. So with about an hour of calls later we we’re able to buy or rent everything we needed.
Later that day we found out what happened. the shipment was refused because no one was expecting it. It was returned to the terminal, unloaded and somewhere along the missing crate was separated never to be found again. fortunately we were able to file a claim with FedEx and we we’re paid for our missing equipment.
Let the assembly begin.
Once we had everything we needed. we had to thing about protecting the floor. which was made of 2 x 2 foot squares of marble. and because we we’re one of the last crews to arrive it was our job to see that nothing was damaged. we protected the floor with 4 x 8 x 1/4 inch sheets of Masonite two layers thick. next we brought all the metal sphere parts up through the freight elevator. then the glass was brought in. fortunately we had a system of labeling the boxes so we knew which box went with which sphere. we had 5 different lengths. 6 diameters and 3 colors. and each panel had a specific arrangement and if something got used up be While Chris began welding the sphere together the rest of us started sorting the glass. once that was done we were able to organize the glass by each of the twenty triangular sections that made up the sphere. It all went like clockwork, we completely assembled all 3 of the 15 foot sisters. including cleanup in just 5 days. we were all very proud.